Dock and Truck Scissor Lift
Dock and Truck Scissor Lift
Save time and reduce man-hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency.
***Please be aware that all prices do NOT include freight. We have had to disable our online checkout feature because most of our products are too large to automatically calculate the freight and need to be run manually. Please contact us via phone at 877-324-9990 or email us at sales@industrial-platforms.com with your ship to zip code for a complete quote including your freight cost.
Dock and Truck Scissor Lift
Save time and reduce man-hours where there are no docks! Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered diamond plate decking is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks.
Complete with upper travel limit switch and overload relief valve. Push-button control is 24V AC on a 20 foot long coil cord. Pre-wired control box includes magnetic starter and overload fuse.
High visibility removable handrails with fixed toe-boards are standard. Includes beveled toe-guards and electric toe-guards around perimeter of platform. External 6.5 HP 208-230/460V, 3-phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.
Our ground to dock lifts makes lifting safe and easy! OSHA and ANSI compliant design. Some features include: Removable hand rails and fixed toe boards, a fixed steel bridge, push button control with 20 feet of cord and a remote power 6.5 HP motor unit. Additional premium options are available; see below for details.
Pricing table for the product is listed below the premium options.
Premium Options:
TRUCK BRIDGE/SPLIT BRIDGE: The standard steel bridge can be replaced with an aluminum bridge 72"W x 18"L. For 5K & 6K units ONLY. Ideal for government applications. Model numbers and pricing as shown below.
Aluminum Bridge - Model# WL-SATB $409.00
Steel Bridge - Model# WL-SSTB $568.00
A Split Steel Bridge can be added to the opposite side of the Truck Scissor Dock Lift. Dimensions are 72"W x 18"L - Model# WL-ADDSATB $993.00
REMOVABLE HANDRAILS/TOEBOARDS: May ONLY be used on a Pit Mounted Truck Scissor Dock Lift.. This option allows the platform to be flush with the floor for fork truck cross traffic. Please deduct 7-1/2" from overall width for usable width - Model# WL-RHT $197.00
ADDITIONAL HYDRAULIC LINE: Allows you to locate power unit further away from the lift. 8 foot of hose is standard. To order, tag model number with suffix WL-HH-(the amount of line needed in feet) - $11.00
APPROACH RAMPS: Please note, APPROACH RAMPS MUST BE ANCHORED TO THE FLOOR!!
APPROACH RAMP FOR 8" LOWERED HEIGHT: 48"W x 65"L; 7º ramp angle. 397 lbs. Model# WL-AR8-48 - $627.00
APPROACH RAMP FOR 8" LOWERED HEIGHT: 60"W x 65"L; 7º ramp angle. 397 lbs. Model# WL-AR8 - $770.00
APPROACH RAMP FOR 10" LOWERED HEIGHT: 60"W x 82"L; 7º ramp angle. 517 lbs. Model# WL-AR10 - $998.00
APPROACH RAMP FOR 14" LOWERED HEIGHT: 60"W x 116"L; 7º ramp angle. 788 lbs. Model# WL-AR14 - $1,559.00
WARNING BEEPER: Sounds during the lifting and lowering operations. 80 decibels. Model# WL-WBO - $236.00
WARNING STROBE LIGHT: Light flashes during the lifting and lowering operations. Model# WL-WLO - $355.00
WARNING BEEPER & STROBE LIGHT: Sounds and flashes during the lifting and lowering operations. 80 decibels. Model# WL-WB - $591.00
50,000 lbs. ROLLOVER CAPACITY (25,000 lbs. per axle): Adds additional structural channel and supports for the deck. Increases lowered height 2". Model# WL-50 - $1,560.00
MOBILE WHEEL KIT: Kit may be used on the 5K & 6K capacity units only. System includes casters and handle (400 lbs.) Factory Install Only. Model# WL-WK - $947.00
SPECIAL RESERVOIR MOUNTING: Available in a wall mount or a handrail mounted bracket (non-removable) Model# WL-RMB - $126.00
STOP SIGNAL SIGN: Optional Stop Sign Signal that raises up to let the driver know when to stop for safe loading/ unloading. This is only available on surface mount units with fixed toe boards. (reduces usable width by 3") Model# WL-SSS - $148.00
KEY SWITCH LOCKOUT: Avoids unauthorized use of the lift. This option will lock out the controls at the power unit. Model# WL-KL - $299.00
TWO SPEED PUMP: Increases the lifting speed by 55% when lift is unloaded. Ideal for unloading applications. Model# WL-TSP - $709.00
VOLTAGE CHANGE: Change the power from standard 460V. 3-phase to 208/230V, 3-phase. Model# VCC-208/230-3 - $90.00
SINGLE PHASE ELECTRIC MOTOR: Replace standard 3-phase power unit with 208/230V, 1-phase, 60Hz power unit (approx.; 1½ gallons per minute pump speed). Model# WL-3HP - $207.00
7-1/2 HP POWER UNIT: Power unit is wired for 3-phase. 208-230/460V, 60Hz, unit will pump approximately 6 gallons per minute. Model# WL-7HP - $839.00
10 HP POWER UNIT: Power unit is wired for 3-phase, 208-230/460V, 60Hz, unit will pump approx. 8 gallons/min. Model# WL-10HP - $1,036.00
SAFETY ACCORDION SKIRT: Keep people and debris from getting under the lift. Contact factory for pricing.
IMMERSION OIL HEATER: For cold weather applications with a built in metal reservoir & thermostat for automatic heat control. 208-230V, single or 3-phase power, 250 watts. This option can only be used in steel tanks. Model# IOH-230V - $543.00. Use with 460V, 3-phase power unit, 500 watts. Model# IOH-460V - $821.00
**All measurements in the table below are represented in inches, pounds and $USD.
Fabrication Authorities International, LLC. is dedicated to finding cost effective solutions for your dock access problems. We offer a complete line of loading dock equipment which incorporates the absolute best in engineering, design, materials, and manufacturing quality. We deliver safe and efficient dock loading equipment at affordable pricing for both marine and trucking industries. Many of our loading dock products can be custom built in the manufacturing process, setting us apart from the competition.
We offer a wide array of loading dock equipment to satisfy a variety of applications; including a complete line of dock levelers, truck and dock ladders, dock shelters and seals, pallet inverters, and drum crushers as well as yard ramps, gangways and hoppers. Our experienced sales technicians are committed to provide you with fast, responsible, and reliable service, including a professional consultation to determine the products needed and create a custom solution for your business. All of our products may be modified or completely custom designed to suit your needs. Our dedicated staff can assist you from concept to completion in a timely fashion.
Please call for additional options or custom designs.
Fabrication Authorities International, LLC. Is your new “total access” solution.
We can customize most Industrial Maintenance Platforms to your specific needs.
Please call (877) 324-9990 or (727) 324-4620 or (727) FAI-INC-0.
Fax us your request at (888) 909-6780.